Atomic Number 4

Introduction :
Beryllium is the compound which as atomic number 4 and mass number 9.01218.  Beryllium has electronic configuration 1s², 2s².  Beryllium has oxidation state +2.  Group 2 elements are Be, Mg, Ca, Sr, Ba, Ra are alkaline earth elements.  Atomic number 4 is a exception : it does not react with water or steam, and its halides are co-valent bond with beryllium.  All the alkaline earth metal as two electrons in the outermost shell, so filled electron shell is achieved by the lose of two electrons to form doubly charged positive ions.  Atomic number 4 is a bivalent element.  It is found naturally only combined with other minerals.  Notable gemstone which has Atomic number 4 include beryl (aquamarine, emerald) and chrysoberyl.  Atomic number is a steel – gray, strong,  light weight brittle alkaline earth metal.



 Beryllium (White grey metal).

1)      Atomic Radius of Group 2 elements: Atomic radius increases down the group.  Atomic radius of Ra is less than Ba.

Element	Be	Mg	Ca	Sr	Ba	Ra
A.R.(pm)	112	160	197	211	222	215

   Where A.R.  = Atomic Radius in pico metre.

2)      Density of beryllium is 1.848g/cm³.

3)      Ionisation energy (I.E.) of Atomic number 4:
       1^st I.E.  =     899.5 KJ/mol.
       2^nd I.E.  =   1757.7 KJ/mol.
       3^rd I.E.  =  14848.7KJ/mol.
        3^rd I.E. is very large because the electron is present near to the nucleous and strongly binded to the nucleous.  Therefore it requires more energy to remove that electron which is ns² configuration.

4)      Elecrtropositive character of  Group 2 elements: Electropositive character increases down the group.

5)      Metallic properties of Atomic number 4: Atomic number 4 has low density (1.85 times that of water), high melting point= 1287⁰C.  High temperature stability and low co-efficient of thermal expansion, These conditions is suitable for aerospace material,  Atomic number 4 is a important component of planned space telescope because of its relatively high transparency to X-ray.

6)Reaction of Atomic number 4 with air: Beryllium does not burn unless it is in the form of dust or powder.  Be has a thin layer of Beryllium oxide on its surface which prevent any new oxygen getting at the underlying Be to react.
               2Be_(s)      +    O_2(g)     →       2BeO_(s)

7)      Diagonal relationship of Atomic number 4: Beryllium shows diagonal relationship with Aluminium.  It is the similarity between the first element of a group with the second element in the next higher group.

8)      Ores of Beryllium:
a)      Betrandite      (Be₄si₂O₇(OH)₂)
b)      Beryl              (Al₂Be₃Si₆O₁₈)
c)      Chrysoberyl   (Al₂BeO₄)
d)     Phenakite        (Be₂SiO₄)
      Precious form of Beryl are aquamarine, bixbite and emerald.

Nomenclature of elements with atomic number > 100

Introduction :
In the periodic table the elements are arranged in the order of the atomic number.  Atomic number is nothing but it is the number of proton or number of electron in the neutral atom. It is denoted by the letter Z.

The modern periodic law states that “ the physical and chemical properties of the elements are periodic function of their atomic numbers.”
Periods constitutes a series of elements whose atoms have the same number of  electron shell i.e., principal quantum number (n). There are seven periods and each period starts with a different principal quantum number.

Transuranium elements are elements beyond uranium (Z=92) they all synthethic elements.   Element with atomic number 100 is called as Fermium and the elements beyond these element in the periodic table is called as transfermium element.  The element after atomic number 100 is normally named as famous scientist.  But there is a lot of ambiguity in the names.  In each country the name will differ.  Some of the elements will be having more than one names

For example Kurchatovium with atomic number 104 is also called as Rutherfordium
Neilsbohrium also known as Borium has atomic number of 107.

The discovererc of these elements normally decide the name of the element.  Since same element can be made in the laboratory by more htan one scientist more than one name existed

Some other common names or nomenclature of elements with atomic number > 100 are given as

Atomic Number	Name
Z = 105	Dubnium
Z = 106	Seaborgium
Z = 108	Hassnium
Z = 109	Meiternium

IUPAC nomeclature of elements with atomic number > 100

To over come this ambiguity International Union of Pure and Applied Science (IUPAC) has recommended a nomeclature for elements with atomic number greater than 100.
IUPAC has given the name using the Latin words for their numbers.  The root words for the names is given in the table

Numerical	Root Name
0	nil
1	un
2	bi
3	tri
4	quad
5	pent
6	hex
7	sept
8	oct
9	en

Name (Nomenclature) of some of the elements with atomic number > 100

Atomic number	Name of the element	Symbol
Z = 101	Unnilunnium	Unu
Z = 102	Unnilbium	Unb
Z = 103	Unniltrium	Unt
Z = 104	Unnilquadium	Unq
Z = 105	Unnilpentium	Unp
Z = 106	Unnilhexium	Unh
Z = 107	Unnilseptium	Uns
Z = 108	Unniloctium	Uno
Z = 109	Unnilennium	Une
Z = 110	Ununnilium	Uun
Z = 111	Unununium	Uuu
Z = 112	Ununbium	Uub
Z = 113	Ununtrium	Uut
Z = 114	Ununquadium	Uuq
Z = 115	Ununpentium	Uup
Z = 116	Ununhexium	Uuh
Z = 117	Ununseptium	Uus
Z = 118	Ununoctium	Uuo
Z = 119	Ununennium	Uue
Z = 120	Unbinilium	Ubn

Colligative properties and determination of molar mass

Introduction :

The vapour pressure of solution decrease when a non volatile solution is added to a volation solvent. There are many properties of solution which are connected with this decreasing of vapour pressure. These are the relatively of vapour pressure of the solvent, depression of freezing points of the solvent. Elevation of the boiling point of the solvent, osmotic pressure of the solution. Everyone these of the property depend on the numeral of solute particle irrespective of their environment relative.

Relative lowering of vapour pressure:

In colligative properties and determination of molar mass, the vapour pressure of a solvent in solution is less than that of the pure solvent. Raoult recognized that the lower of vapour pressure depends simply on the concentration of the solute particles and it is dependent of their individuality.

`p_(1)=x_(1)p_(1)^(0)`

The reaction of the colligative properties in the vapour pressure of solvent is given as:

`Deltap_(1)=p_(1)^(0)-p_(1)=p_(1)^(0)-p_(1)^(0)x_(1)`

           =`p_(1)^(0)(1-x_(2))`

In a solution colligative properties containing several non volatile solutions, the lowering of the vapour pressure depends sum of the mole fraction of different solutions.

`(Deltap_(1))/(p_(1)^(0))` =`(p_(1^(0))-p_(1))/(p_(1)^(0))` =`x_(2)`

                The expression on the left hand side of the equation as mentioned earlier is called relative lowering of vapour force and is equal to the mole division of the solution of the colligative properties. The above equation can be determinations as:

`(p_(1)^(0)-p_(1))/(p_(1)^(0))` =`(n_(2))/(n_(1)+n_(2))`

                Here n₁ and n₂ are the number of mole of solvent and solute respectively present in the solution.

For dilute solution n₂<<n₁ hence neglection n₂ in the denominator we have

`(p_(1)^(0)-p_(1))/(p_(1)^(0))` =`(w_(2)xxM_(1))/(M_(2)xxW_(1))`

Here w₁ and w₂ are the mass and M₁ and M₂ are the molar mass of the solvent and solute correspondingly.

Elevation of boiling point:

In the colligative determination of molar mass, the vapour pressure of a liquid increase with enhance of temperature.It boils at the warmth at which its vapour pressure is identical to the atmospheric strain. The determination molar boiling point of a solution is always higher than that of the boiling point of the pure solvent.

Depression of freezing points:

The lowering vapour pressure of a solution cause a lowering of the freezing points compared to that of the determination  pure solvent in molar mass. The freezing points of the substance, the solids phase are the dynamic equilibrium with the liquid phases. The freezing points of the substance may be defined as temperature at which the vapour pressure of the substance in its liquid phase is equal to the vapour pressure in the solids state.

Mole chemistry

Introduction:
All substance is made up of smallest particle, called atom. In chemistry, the smallest particle, used for calculation, is said to be a mole. Any chemical equation or a chemical expression is given with moles of a substance under consideration.

Mole Definition:
Mole is the smallest unit used in all calculations in chemistry. Mole is a unit of measurement, which gives the same number of chemical entities (atoms, molecules, ions, electrons), as in number of atoms in 12 grams of carbon.

Mole concept is used in calculation of concentrations of solutions, in the calculation of molecular mass, etc.

Molar mass of a substance is defined as “mass per mole” of a substance.
Mole of a substance can also be defined as: “one mole of a substance contains Avogadro number of molecules or atoms”.
The value of Avogadro’s number is – 6.023 x 10²³
This is given by:

Mole =
Mole Calculation

Many calculations, regarding a chemical compound can be obtained from the mole concept.
Mole of a substance is used to calculate-
a.     Grams of a substance, if molar mass is known.
b.     Molar mass of a substance, if grams are known.
c.      Molarity, molality, mole fraction.
d.     Number of atoms present, with the help of Avogadro’s number.

Thus, moles play a very important role in chemical calculations.

Chemistry Mole Problems-
Example – 1:
A sample of magnesium hydroxide contains 12 grams of the substance. Calculate the number of moles of Mg(OH)₂ present.
Answer:
Molar mass of Magnesium hydroxide is: 58.32

Moles of Magnesium hydroxide = Mass in grams / Molar mass
                                                         = 12 grams / 58.32 grams/mole
                                                        = 0.206 moles.

Example – 2
13.65 moles of methane gas was obtained in a reaction. Find the mass in grams of methane.

Answer:
Molar mass of methane is 16.04 grams/mole.
Moles of methane = Grams of methane / Molar mass
Grams of methane = Moles of methane x Molar mass
                                    = 13.65 moles x 16.04 grams / mole
                                    =   218.94 grams of methane
Mole Problems Chemistry
Finding number of atoms, with Avogadro number
Example – 3
Calculate the number of atoms present in 4.2 moles of Sodium.
Answer:

1 Mole of a substance contains Avogadro number of atoms/molecules/ions.
Therefore, Avogadro’s constant =

We have – 4.2 moles of Sodium.

Number of atoms of Sodium present =


    4.2 moles of Na x   = 25.29 x 10²³ atoms of Na

Example – 4
 There are 3.01 x 10³² molecules of carbon dioxide present. Calculate:

i)                   Number of moles

ii)                Number of grams of CO₂.

Answer:

i)  To calculate the number of moles-

Moles of Carbon dioxide

= 3.01 x 10³² atoms of CO₂ x

= 4.99 x 10⁹ moles of Carbon dioxide

ii)                 To calculate the mass in grams of carbon dioxide –

Mass in grams = Moles of CO2 x Molar mass

                          = 4.99 x 10⁹moles x 44 grams / mole

                           = 219.56 x 10⁹ grams of Carbon dioxide

Molar Mass

Two very important entities of elements that recognise its characteristics are its atomic number and atomic mass. Similarly, mol mass of a compound is very important and is used in almost all stoichiometric calculations of a compound.

Molar Mass Definition

Molecular mass of a compound is the sum of atomic masses of all elements present in it.

Molecular mass is a physical property of a compound. It is denoted by M.

Molar Mass-

Molecular mass can also be calculated using the mass of a substance and the amount of substance present in moles.

Molecular mass = Grams of a substance / Moles

Mol mass is expressed in grams per mole.

Mol mass is used to find the moles of a substance, when its mass is given.

How to Calculate Molar Mass –

Molar mass of a substance can be found from the atomic masses of the elements present in it. Atomic masses of the individual elements can be obtained from the periodic table.

To calculate mol mass, we need to follow the following steps:

1. Write the Formula for Molar Mass of the compound whose mol mass is to be calculated.

Example – Magnesium chloride

MgCl₂

2. Find the subscripts/number of each element present in the compound.

1 x Mg + 2 x Cl

3. Multiply the number of each element present with the atomic mass of that element.

1 x 24.305 (Mg) 2 x 35.453 (Cl)

= 24.305 = 70.906

4. Finally, put all the atomic masses and their multiplied values together and sum it up.

Mg + 2 x Cl

= 24.305 + 70.906

= 95.211 grams/mole

Molar Mass of Water –

Formula of water is H₂O.

To calculate the mol mass of water, we need to have the atomic masses of hydrogen and oxygen.

Atomic mass of hydrogen = 1.008 grams/mole

Atomic mass of Oxygen = 15.994 grams /mole

There are two moles of Hydrogen. Thus, 2 x 1.008 = 2.016

Mol mass of water = 2.016 + 15.994 = 18.01 grams/mole.

Example of molar mass calculations:

To calculate the mol mass of Sodium hydroxide:

Formula of sodium hydroxide is NaOH

There are 1 mole of sodium, Na, 1 mole of hydrogen, and 1 mole of Oxygen.

To find the mol mass, we can add the atomic masses of all the elements.

Atomic mass of Sodium = 22.989 grams/mole

Atomic mass of oxygen = 15.994 grams/mole

Atomic mass of Hydrogen = 1.008 grams/mole

Mol mass of Sodium hydroxide = Na + O + H

= 22.989 + 15.994 + 1.008 = 39.991 grams/mole.

Mol mass of sodium hydroxide is taken approximately for calculations as 40 grams/mole.

Metals Nonmetals and Metalloids

Periodic table consists of an array of elements, with different metallic properties. Some are completely metallic, making them soft or hard metals. Other major type includes the non-metals, which have completely different physical and chemical properties from metals and are easily distinguishable.

Some elements have properties in-between that of a metal and a non-metal. These types of elements are termed as ‘metalloids’.

Characteristics of Metals Nonmetals Metalloids-

Common characteristics through which a metal, non-metal and a metalloid can be differentiated are:

Metals:

An element is called as metal, when, in the process of forming an ionic bond, it donates electrons, to form a positive ion. Thus, the main characteristics of a metal is that, it should have very less first ionization energy, or energy due to removal of outermost electron.

Some common properties of metal are:

1. Metals are mostly solids, hard or soft. Metals of first two groups of the periodic table are soft solids, while transition metals are hard. Mercury is the only metal, which is a liquid.
2. They are malleable and ductile.
3. They transfer heat and electricity due to the presence of ions in their structure. There is a special type of bond called as metallic bond, which gives metals all these distinctive properties.

Non-metals:

An element is said to be a non-metal, when it shows electronegative property than electropositive property. They accept electrons to form an ionic bond. Their first ionization energy is very high.

1. Non-metals are mostly liquids, gases or in some case, amorphous solids.
2. If they are solids, they are brittle solids, and are not malleable and ductile.

Metalloids:

These are elements which have properties in-between that of metals and non-metals. Metalloids are called as semi-metals. They have lustre like metals, but do not conduct electricity.

Metalloids find use as semiconductors. Metalloids are placed with the non-metals in 14^th, 15^th and 16^th Group of the periodic table.

List of Metals Nonmetals and Metalloids

Some of the metals, metalloids and non-metals are listed below:

Metals	Metalloids	Non-metals
Copper- Cu	Silicon -Si	Oxygen-O
Iron- Fe	Germanium - Ge	Chlorine –Cl
Mercury Hg	Antimony -Sb	Nitrogen – N
Cadmium Cd	Arsenic - Sb	Carbon – C
Sodium Na	Tellurium -Te	Sulfur – S
Calcium Ca		Phosphorus -P
Chromium Cr		Bromine -Br

Is Gold a Metal Nonmetal or Metalloid–

Gold, Au, is one of the transition elements. It has an atomic number of 79 and is placed in group 11 of the table. It is a transition metal.

Is Sodium a Metal Nonmetal or Metalloid–

Sodium is placed in the first group of the periodic table. It is a soft metal. Sodium is one of the alkali metals.

Is Calcium a Metal Nonmetal or Metalloid-

Calcium, a white amorphous solid, is a metal, because of its electron donating property. Calcium is an alkaline earth metal.

Ionic Compound

Elements combine together to form compounds. Chemical compounds are of many types, depending upon the bond present in them. Corresponding to the two ways by which any two atoms rearrange to form a compound, two types of bonds are formed.

1. Ionic bond
2. Covalent bond.

Ionic bond or electrovalent bond is established by the transfer of one or more valence electrons from one atom to the other.

Thus, ionic bond is a chemical bond formed between two atoms by the transfer of one or more valence electrons from one atom to the other.

This bond is also called as a polar bond.

Formation of an ionic bond:

Formation of an ionic bond can be explained using the following example:

Consider an atom A , which has two electrons in its outermost shell. Another element B, has 6 electrons in its outermost shell.

The atom A has two electrons in excess, to make it to the Noble gas electronic configuration, while atom B has two electrons less to make it to that level.

Now, atom A gives two of the excess electron to atom B, and by this, atom A attains a completely filled shell, while atom B, having attained the required amount of electrons, also reaches the noble gas configuration.

They therefore form an ionic bond between themselves.

List of Ionic Compound Formula-

Lists of ionic-compounds with their formula are:

S.No	Ionic-compound	Formula
	Sodium chloride	NaCl
2.	Potassium iodide	KI
3.	Lithium iodide	LiI
4.	Aluminium oxide	Al2O3

Ionic Compound Example-

Some examples of ionic compound are:

Magnesium oxide - MgO – Mg²⁺, O^2-

Calcium Fluoride – CaF₂ – Ca²⁺, 2F^-

Aluminium Fluoride – AlF₃ – Al³⁺, F^3-

Properties of an Ionic Compound-

1. Ionic-compounds are three dimensional solids, with well-defined geometrical pattern.
2. Ionic solids conduct electricity when they are in water solution or in the fused state (molten state).
3. They are quite hard, have low volatility and high melting and boiling point.
4. Ionic solids are soluble in polar solvents, due to dissociation of their ions.
5. Ionic solids are very stable and have very high density.

Is NaCl an Ionic Compound-

Sodium chloride, NaCl is ionic in nature.

The formation of sodium chloride is as follows:

Na has an electronic configuration of 2, 8, 1. The last electron, in the third shell, has to be removed, for it to attain noble gas configuration.

Chlorine has a configuration of 2, 8, 7. It needs one extra electron, which it gains from Sodium, thereby getting the required magic number of ‘8’.

Is Salt an Ionic Compound–

Sodium chloride is also called as common salt. Other than this, most of the compounds, commonly known as salts are formed from the neutralization reaction of an acid and a base. They are all ionic-compounds, because they dissociate into ions in their solution.